 |
|
 |
 |
|
|
|
|
|
 Latest News |
| |
| April 23, 2010 - June 19 - 24, 2010: Orochem Technologies will be attending HPLC 2010 to be held in Boston. | | | | April 23, 2010 - May 24 - 26, 2010: Orochem Technologies will be attending ASM 2010 to be held in San Diego. | | | | April 23, 2010 - May 9 - 11, 2010: Orochem Technologies will be attending PREP 2010 to be held in Philadelphia. | | |
|
| |
More News... |
|
Technical Corner |
| |
Catalog
|
| |
Application Notes
|
| |
Handbooks & Protocols
|
| |
Newsletters
|
|
Special Offers |
| |
Register online and avail up to 20% off of on all HPLC columns. Contact us today at 630.916.0225 for details
|
|
| |
| |
| OroSym™ C18 column series are bonded to the maximum density to have the highest hydrophobicity and thus the lowest polarity. High C18 moieties result in the lowest interaction with analytes, with silanol, and demonstrate high stability at high pH and the broadest pH range. OroSym™ columns also demonstrate higher separation power for isomers, with a near perfect symmetry for basic, acidic and neutral compounds |
- Surface Area: 45m²/g
- Pore Size: 130Å
|
 |
- p-methyl benzoic acid
- Pyridine
- Phenol
- Acetophenone
- Amino-dimethyl benzene
- Toluene
150 x 4.6 mm column at 30°C
Mobile Phase: MeOH: AcOH/ NaAc(pH 5.0)= 60 : 40
Flow Rate: 1 mL/min
20μL injection detected at 254 nm |
 |
 |
150 x 4.6 mm column at 30°C
Mobile Phase: MeOH: NaH2PO4/ Na2H PO4(pH 7.0)=70 : 30
Flow Rate: 1 mL/min
10μL injection detected at 254 nm |
Sample: 1. Uracil 2. Pyridine 3. Phenol
 |
Promosil C18
KPyridine/KPhenol = 0.33 |
 |
MP C18
KPyridine/KPhenol = 0.45 |
 |
Luna C18
KPyridine/KPhenol = 0.5 |
 |
Orosym C18
KPyridine/KPhenol = 0.53 |
 |
OASB C18
KPyridine/KPhenol = 0.82 |
|
150 x 4.6 mm column at 30°C
Mobile Phase: MeOH: water = 60:40
Flow Rate: 1ml/min
10µl injection detected at 254nm |
Sample: 1. 2, 7- dihdroxynaphthalene
2. 2, 3- dihydroxynaphthalene
 |
150 x 4.6 mm column at 30°C
MeOH: water = 65 : 35
Flow Rate: 1 mL/min
20μL injection detected at 230 nm |
Sample: 1. Urasil 2. Toluene
 |
150 x 4.6 mm column at 25°C
MeOH : 25mM KH2PO4 /K2HPO4 (pH 6.0) = 80 : 20
Flow Rate: 1 mL/min
5μL injection detected at 254 nm |
Sample: 1. Uracil 2. Phenol 3. Nitrobenzene 4. Naphthalene
 |
150 x 4.6 mm column at 50°C
MeOH : 0.25% TFA (pH 1.5) = 70 : 30
Flow Rate: 1 mL/min
5μL injection detected at 254 nm |
|
|
|
|
|
|
|